Spindle to Key: 92 & 62mm
B - Backset: 35mm
C - Op Type: Lever/Lever
D - Locking Points: 3 hooks 2 deadbolts
E - Face Plate Dim: 16mm
On some versions of Millenco locks you may find that the hooks are in a slightly different position (Millenco sometimes made the same lock for large fabricators and then stamped the faceplate with their logo etc such as the Ultimate collection etc ) if this is the case then the hook boxes and keeps may need to move up 20mm approx to suit the new one which should not prove too much of an issue other than extending / moving the keeps and routing slots etc.
You should find that the centre lock case is in exactly the same place
!! A little trick which may help !!
You may well find that the centre lockcase on the new one, is the exact match as the existing one in which case you could switch it over for the old one ( 3 screws to remove only) which would then mean that all the hooks would remain as previous and restore the lock to full working order again.
The Overall length of the lock faceplate shown (OL: in attatched detailed dimensions file) is simply trimmed down at the ends with a hacksaw to suit the length of your own personal door
