Siegenia Tilt & Slide patio repair drive gear 25 B/set 1870mm

Rollover Image and click to Zoom

Siegenia Aubi Tilt & Slide patio repair drive gear 25mm Backset 1870mm or 2100mm

Siegenia Tilt & Slide patio replacement door lock repair drive gear, Lock has 2 rollers, door lock then connects to corner sliders which in turn connect to other locking points to operate the patio mechanisms. This patio generally has handles to both the inside and outside faces of the door and has a seperate euro profile door cylinder lock to dead lock the patio doors (although some fabricators have been known not to use this and fit either a handle to the internal only or a blanking plate externally to cover the seperate cylinder lock)

Choose Size

From £53.07 (inc VAT)

Delivery
Returns

* Free Delivery To UK Mainland Destinations only (areas Outside UK Mainland will be chargeable)

Our aim is to pick and pack all orders received by 12Noon G.M.T. Mon toFri (excluding bank holidays and holiday shutdowns) ready to be despatched the same day.

Smaller items are sent via Royal mail post, whilst larger packages will be sent via one of our secure couriers .

Our aim is to always provide an excellent, secure, and efficient service and Uk mainland items are generally delivered within 2 - 3 days and in many cases next day.

Goods that are delivered outside of the UK mainland are likely to have a longer delivery period to accomodate the courier service used.

Returns Brief

Products can be returned by simply requesting a Goods Return Note (G.R.N.) from us. Return packages should clearly show this number on the external packaging so we can quickly process your return. You can see our full returns conditions in our returns policy section.
N:B. Goods returned for a refund which were ordered wrong or no longer required,must be in the original state supplied, un-used, and un-cut.

Siegenia Tilt & Slide patio repair drive gear 25mm Backset 1870mm or 2100mm patio lock

7mm spindle
Length:Choose 1870mm or 2100mm
1870mm: The faceplate has stamped on it SI 3/PZ GR4 ATL FFH 1650 - 2150
2100mm: The faceplate has stamped on it SI 3/PZ GR4 ATL FFH 1880 - 2380
Locking Points: 2 rollers
Backset: 35mm

Spindle to Key: 200mm the door handle and cylinder lock are 2 separate gear boxes from each other and allow the patio to be operated from inside and outside.
The faceplate has stamped on it SI 3/PZ GR4 ATL FFH 1650 - 2150 or 1880 - 2380 (This is the size range that the lock will cover. The measurement is taken from the top corner to bottom corner of the full length of the patio on the handle side)
Do not only measure the lock mechanism include the corner extensions that connect to it at the top & bottom. This is the FFH (full frame height sometimes called rebate height) Pick the mechanism that falls between these sizes.
The lock is then simply cut down to size with a hacksaw leaving enough connecting teeth underneath to link into the corner extensions.

Underneath the faceplate are teeth to connect to any corner drive gears.

This patio generally has handles to both the inside and outside faces of the door and has a seperate euro profile door cylinder lock to dead lock the patio doors (although some fabricators have been known not to use this and fit either a handle to the internal only or a blanking plate externally to cover the seperate cylinder lock)